Painting the bilge and adding the the second layer of fiberglass onto the transom

We started by adding the second layer of fabric onto the transom. Then we glued the wooden reinforcements onto the transom and some of the bulkheads. Then we painted the bilge after cutting and adjusting the motor pod cover. The paint we used was normal Mauvillac oil based gloss white.

Bilge and motor pod painted with 1st coat

Bilge

Motor Pod

Reinforcements we prepared on sunday

Pod bolts-heads were hidden under coat of glue

sole hatch reinforcement

connectors we went to look for on monday

pod cover ready to receive its glue before being put in place

blue tape used a bit everywhere for the painting.